Woven Vinyl Wall Upholstery

Request a quote →Sample book and A4 swatches available — Request a swatch kit · stock items carry no MOQ

Woven vinyl wall upholstery in vinyl-coated PET yarn: a woven face on a panel, for feature walls, headboards, lift lobbies and the wall behind a banquette. It wipes clean where a painted wall would show every mark.

Specifications

Wall Upholstery
PropertySpecification
Materialvinyl-coated PET yarns (woven vinyl)
Surface1.0 mm woven vinyl
ConstructionWoven, linen and canvas textures
Surface useVertical surfaces: wall panels, headboard walls, banquette backs, feature and reception walls — supplied bare or laminated to a board
Stain & water resistanceStain and water resistant; wipes clean with a damp cloth
HandlingA woven face on a panel: no pile, no marking, wipes clean with a damp cloth
Colour fastnessTested to BS EN ISO 105-B02 and BS EN ISO 105-B04 (reports TÜV SÜD 70.404.18.21948.01-00, SGS SHIN1707041322MR and SGS HZ1293415/TX)
Width200 cm ±1%
Roll length15–25 m per roll
Weight550–850 gsm (average), covering the fabric alone and the version on a non-woven or 1 mm foam backing
BackingThe same backing as the wallcovering line: PET non-woven or a 1 mm PVC foam backing; the fabric is also supplied bare, for direct application
Outdoor suitabilityIndoor walls; the face itself is UV-stabilised, but a bonded panel is an interior build
Face composition—
Backing composition—
Product standardEN 15102:2007+A1:2011 · DoP No. 20220813 · Certificate of Conformity No. 157 (Dedal) · see Certifications

Specifications are taken from the official specification sheet for this product line. Items shown with a dash are quoted per project; ask us for the current figure.

Woven vinyl wall upholstery behind a banquette, wall and seat in the same weave

Width, seams and cutting

At 200 cm the roll covers a storey-height panel without a horizontal join, so the seams on a wall run vertically — which is where the eye expects a join anyway. Both seam types work: sewn for a tailored fabric look, HF-welded for a seam flat enough to disappear across a panel face.

Wall work is usually a lamination job rather than a sewing job. We supply the face; the panel maker bonds it to plasterboard, MDF, PET acoustic sheet or a GMT board, and sets the substrate and the edge trim. Tell us the panel size before ordering: the face has to be cut with the weave running straight along the panel edge, because a wall is read at eye level and a panel cut on the skew shows it.

Upholstery formats and performance
PropertyValue
Width200 cm
SeamsSewn, or HF-welded for a flat seam with no stitch line
AbrasionMartindale ISO 12947-2, over 20,000 rubs
FormaldehydeEN 717-2, E1: 0.122 mg/m³h

Where this surface works

  • Hotel guest rooms Headboard walls and the wall behind the bed, where a suitcase and a cleaning trolley both mark the paint.
  • Meeting and boardrooms Panel walls that also take sound when they are built on an acoustic core.
  • Restaurant and bar walls Banquette backs and the wall a chair hits when it is pushed back.
  • Reception and lift lobbies A woven face behind a desk or in a lift lobby, wiped down as part of the daily round.
  • Retail fitting rooms Vertical surfaces that are touched all day and cleaned by staff rather than specialists.
  • Curved and shaped walls The face follows a curve when it is laminated to a curved core.

Where is woven vinyl wall upholstery used?

Woven vinyl wall upholstery is used where a vertical surface has to look like fabric and still take cleaning: hotel headboard walls, meeting-room panel walls, restaurant banquette backs, reception and lift lobbies, fitting rooms and the walls of clinic waiting areas. It is specified by interior designers and bought as panels — the face is laminated to a board in the joinery shop, or delivered bare for the panel maker to bond. Nothing walks on it, so wall work trades abrasion for the other two requirements: marks that wipe off, and a face that can be replaced panel by panel. The woven face is 1.0 mm thick on a 200 cm roll and carries the same light fastness as the flooring, above 6 on the blue wool scale.

What this surface does well

  • Marks less than paint A woven face scuffs less visibly than paint or paper: a mark sits in the weave rather than on the surface.
  • Wipes clean without washing Coffee, ink and hand marks lift off with a damp cloth — no shampooing of a panel and no drying time.
  • Acoustic option On a PET acoustic sheet or GMT board the panel adds absorption; values are quoted per project.
  • Panel-sized width 200 cm covers a storey-height panel without a horizontal join.
  • Replaceable in sections A damaged panel comes off and a new one goes up; the rest of the wall is untouched.
  • One weave with the floor Same colourway as the flooring and the seating, so wall and floor read as one surface.

What do the contract tests show?

The figures that matter on a wall are not the same as on a seat. Abrasion is still tested — over 20,000 rubs to ISO 12947-2 — because a banquette back and a lift wall take hands and trolleys all day, but the decisive numbers are fastness and emission. Colour fastness to light is above 6 on the blue wool scale (BS EN ISO 105-B02) and rubbing is 4/5 wet and dry (BS EN ISO 105-X12). Formaldehyde emission is E1 at 0.122 mg/m³h to EN 717-2, with 3.5 mg/kg release to EN 15102 — the wallcovering standard the line is certified against (Certificate of Conformity No. 157). Reaction to fire is classified on the fabric rather than on a finished panel: the same 1.0 mm woven vinyl face was tested to GB 8624-2012 on a rigid substrate and classifies B2 (D-s2, d0) (SGS report XMIN2012012314CM). What the fabricator adds behind it — foam, a framed cavity, an acoustic liner — belongs to their build-up and is assessed with the panel, not with the cloth we supply.

Tested performance, with the methods behind it

Values below are taken from the official texlyweave® upholstery specification and data sheet; for wall work the rows that carry the specification are fastness, formaldehyde release and reaction to fire. Certificate No. 157 and the test data on file are on the Certifications page.

Wall Upholstery, tested performance
CharacteristicTest methodResult
Skew and bowEN 427< 1%
Abrasion (Martindale)ISO 12947-2:1998 + Cor.1:2002> 20,000 rubs
Fungus resistanceASTM G21-13Grade 0
Light ageing (UV exposure)ISO 4892-3:2016 Cycle 1, UVA-340, 1,000 hGrade 4–5
Colour fastness to lightBS EN ISO 105-B02:2014> 6 (blue wool scale) · TÜV SÜD 70.404.18.21948.01-00
Colour fastness to rubbingBS EN ISO 105-X12:2016Wet 4/5, dry 4/5 · SGS HZ1293415/TX
Pentachlorophenol (PCP)CEN/TS 14494Not detected
Formaldehyde emissionEN 717-2E1: 0.122 mg/m³·h
Release of formaldehydeEN 15102:2007+A1:2011E1: 3.5 mg/kg
Heavy metals and specific elements—Pass
Release of vinyl chloride monomer—0.12 mg/kg
Phthalates (DEHP, DBP, BBP, DIBP)REACH Annex XVII, entries 51 & 52, (EU) 2018/2005Pass
REACHREACH Regulation, 211 substancesPass
RoHSEU RoHS Directive 2015/863Pass
AZOISO 14362-1:2017Pass
Materials in contact with foodstuffsEN 1186: Part 3Pass
Proposition 65US California Proposition 65 — lead / cadmium / phthalateNot detected

Indicative values from production testing; the report of record travels with each delivery.

Methods, standards and the reports behind these figures: Techniques →

What matters on site

  • Substrate first Plasterboard, MDF, PET acoustic sheet or GMT — the board decides the fixing, the edge trim and the acoustic result.
  • Panel size before cutting Cut with the weave straight along the panel edge; a wall is read at eye level and a skewed panel shows.
  • Acoustic build-up Absorption comes from the board behind the face, not the fabric; values are quoted per project.
  • Seams in the right place Vertical seams planned against door heads and sockets, rather than landing in the middle of a panel.

What decides how the finished piece looks?

Two things: the straightness of the cut and the evenness of the stretch. A woven face shows a panel that has been pulled harder at one end than the other, particularly in a plain weave. Cut every panel the same way up and tension them the same way, and the wall reads as one surface.

Everyday maintenance

  • Routine Dust with a soft brush or vacuum on low, then wipe with a damp cloth. Panels are not washed.
  • Marks at handle height A mild soap solution, then rinse with clean water; work the whole panel evenly rather than scrubbing one spot.
  • Ink and scuffs Blot first, then a mild soap solution; test anything stronger on the back of a spare panel.
  • No shampooing Unlike textile wallcovering there is no wet extraction and no drying time — the face is wiped and the wall is back in use.

How is wall upholstery cleaned?

A wall is cleaned far less often than a floor, and the point of this face is that ordinary marks come off without a shampooing cycle: dust, wipe, done, no drying time and no wet extraction.

Full cleaning schedules, chemicals and spot guidance for this line: Techniques →

Custom and special orders

  • Three backings PET non-woven, 1 mm PVC foam, or bare fabric for direct application.
  • Wall to floor in one colourway The same woven vinyl runs through the wallcovering, flooring and upholstery lines, so a scheme can be matched across all three.
  • Colourways See the collections in this product line for the colourways available.

How to order

  • A4 swatches Available to qualified distributors, specifiers and designers; samples are free of charge, with the courier at your cost (freight collect).
  • Project quantities Send us the colourways, the metreage and where the fabric is going and we will quote against production.
  • Design service If you are working to a client scheme, tell us the look and we will suggest the closest weave.

Upholstery: questions we get asked

Does it mark where people brush past?

Less than paint or paper. A mark on a woven face sits in the weave rather than on the surface, and most of it lifts off with a damp cloth — which is why it is used on the walls a suitcase or a chair hits.

Do the joins show?

Seams on a wall run vertically, at panel joints, where a join is expected. Sewn seams read as a tailored fabric wall; HF-welded seams lie flat enough to near disappear on a plain face. Plan the seams against door heads and sockets before the boards are cut.

Can it go on a curved wall?

Yes, when it is laminated to a curved core. The limit is the core rather than the face — tell us the radius and the board and we will confirm with the panel maker.

Does it add acoustic absorption?

It can, but the absorption comes from the build-up behind the face: a PET acoustic sheet or a GMT board with the right cavity. We quote acoustic values per project for these constructions rather than for the fabric on its own.

Can it be hung or glued?

Both. On a PET non-woven backing it hangs and takes adhesive like a wallcovering; where the wall has to take contact it goes onto a 1 mm PVC foam backing, or is bonded to a panel by the panel maker.

Is it suitable for a wet room or a bathroom?

It does not soak up moisture or support mould, and it wipes clean, but a shower enclosure is not its job: the surface is specified for dry interior walls, with the same weave as the floor carried up the wall.

Will it stand up to contract use?

Abrasion is rated over 20,000 rubs (Martindale, ISO 12947-2).

Can the same fabric go on walls and furniture?

Yes, that is the point of the line: one weave from wall to furniture. The woven face is the same; only the backing changes.

Which backing should I specify?

PET non-woven for wall application, a 1 mm PVC foam backing for furniture veneering and soft-wall work, or no backing where the bare fabric goes on directly.

How do I get samples?

A4 swatches are available to qualified distributors and specifiers; samples are free of charge, with the courier at your cost (freight collect). Tell us which collections you are working with and we will send the closest matches.

Collections available in this surface

MONO · TISSUE · SLUB · STRIPE

Browse woven vinyl collections by weave

Specifying upholstery? The guide covers tensile, tearing, burst and Martindale results, sewing or HF welding, and the documents to request: read the guide →

Buying woven vinyl upholstery fabric

We design and finish woven vinyl upholstery fabric in our own production base in Zhejiang, and quote factory-direct, so the price you receive is the maker's price rather than a trading margin.

Upholstery fabric in stock has no minimum order and ships in 2–3 weeks; custom production runs 4–6 weeks depending on quantity and specification. Sample books and A4 swatches go out freight collect — tell us the colourways you are considering and we will send them Request a swatch kit.

Technical detail sits alongside this page: specification sheets, installation notes and cleaning and maintenance. Certificates and test reports are on Resources.

Request a quote →

Just need upholstery samples, not a price yet? Request a swatch kit — sample books and A4 swatches, courier freight collect.

Buying for resale rather than specifying? · Become a distributor · OEM and private label.